Information Wanted - Jack Points 3291-3297

05-15-2008, 03:24 AM

Planemakers | Information Wanted - Jack Points 3291-3297

Hi Folks,

I hope all is well with you.

I need a copy of the instructions explaining the installation of the optional wing jack points that SNA had sold in the past.

If anybody has one that they could copy and mail me or send via email somehow, I would be grateful.

Email: planemakers@planemakers.com

Sail Mail:

Planemakers, Inc.

8191 North Tamiami Trail

Sarasota, FL 34243

Posted by Ron Broyles on May 15, 2008 at 22:59:11:

In Reply to: A request for info posted by Planemakers Inc on May 15, 2008 at 15:03:51:

I have a set that I ordered from them, but no plans. What would you like me to do??

Posted by Mike on May 16, 2008 at 09:54:43:

In Reply to: Re: A request for info posted by Ron Broyles on May 15, 2008 at 22:59:11:

John,

I assume you are talking about the plate that goes under the wing with the mooring point pin that goes thru the plate and into the underside of the wing about 50 inches out from the root..?

I don't have anything in the manuals re the jacking points; however subkit 7 closing wing pg 93,94, 1992 talks about the mooring pin installation in the wing. Other than that it's just a plate with an indent for the jack. I can send you picts if you want.

There is a builder alert re the closing of the wings in relation to future leaks. I belive this is where I had my issues. By the way the leaks in the starboard wing have been repaired and it was half way between the wing jacking point and the root.

Thanks,

John J

Posted by Planemakers Inc on May 16, 2008 at 13:20:23:

In Reply to: A request for info posted by Planemakers Inc on May 15, 2008 at 15:03:51:

Hi,

Thanks guys... I found the three page set of instructions for them.

Have a great day.

John J

Posted by Planemakers Inc on May 22, 2008 at 15:11:46:

Hi Guys,

I have a request for you guys that have the older kits.

I need two pages.

Sub kit 8, pages C-6 and C-7 from the 1993 version. Older versions have them intentionally left blank because they changed something.

They explain the attachment of the water rudder to the air rudder via the rod.

Zoran needs them and I can't find any in my books.

If you have them and you have a way to get them into the computer, email them to me please.

planemakers@planemakers.com Planemakers, Inc.

8191 North Tamiami Trail

Sarasota, FL 34242

Thanks,

John J

Posted by Planemakers Inc on May 22, 2008 at 15:15:13:

In Reply to: Another Request for Information posted by Planemakers Inc on May 22, 2008 at 15:11:46:

I botched up my code in that last message

A sentance was dropped

If you have no way of getting them into the computer could you please copy and mail them to me at:

Planemakers, Inc.

8191 North Tamiami Trail

Sarasota, FL 34243

Thanks again,

John J